How to strip paint from steel
I am going to highly recommend sanding if you can when dealing with a porous wood. Then a couple of coats of whatever is around. Progressing with my BR 42 project, I have found a total of 8 rust spots on average about 5 inches in diameter in each case so nothing terrible If you have ever tried stripping paint from porous wood, you probably have seen the leftover paint filled in all of the pours of the wood.
4 Ways to Remove Paint from Metal Hinges (& other door hardware)
Stripping the paint off a wrought iron table & chairs and repainting
Amerlok sealer is the holding coat of choice, takes ages to go off and soaks into every little nook and cranny you can't reach. One thing which is not allowed onboard anymore is single part paint. Is this the way to go? Kind regards Marlene from a very cold Scotland at the moment.
Check if the paint is softened with the putty knife. Last Resorts If soda blasting, sandblasting, power washing and sanding are not an option, such as on an interior brick fireplace, one last option before accepting defeat would be to saturate the brick with lacquer thinner, though only small areas at a time and with incredibly good ventilation. For added conditioning, you can dampen a corner of a clean paper towel or soft cloth with a small amount of olive oil, and buff lightly into the stainless steel surface. The cure he is considering is worse than the disease. There are lots of chemical strippers out there, from mild to wild.
There are two ways to remove paint from any surface: physical or chemical. Compatible with paint, varnish and lacquer, this paint remover is ideal to use on window frames and door trims. A stripe coat is a brushed coat with emphasis on working the paint into all cracks and crevices. For automotive purposes, you don't have to worry too much about what type of paint your vehicle has because most varieties of proper automotive paint behave in similar ways when stripped, regardless of your method.